There are lots of varieties of automotive and marine electrical connectors. Many of the common electrical connectors are butt connectors, ring terminals, spade terminals, and quick disconnect connectors.
Butt connectors are widely-used to splice two wires together.
Ring terminals are employed to connect the wire into a stud point just like a screw for grounding or similar.
Spade terminals works extremely well like ring terminals however the nice thing about the spade terminal or fork terminals could be that the stud does open to connect with it. The spade slide across the stud to get a connection.
Quick disconnect connectors are employed to hook up to a tab and are available in four tab sizes,.110 tab is 1/8 inch,.187 tab is 3/16 inch,.250 tab is 1/4 inch and.375 tab is 3/8 inch. Agriculture Electrical Connector ‘ll find male and female quick disconnect connectors the feminine will slide onto the male tab. Other electrical connectors include copper lug ring terminals, crimp caps, t tap connectors, plier tap connectors, hook terminals, and pin terminals.
Electrical connectors may be insulated or non insulated and are available in a variety of types of insulation. The non insulated electrical connector is generally bare copper that has a tin plating. Insulated terminals comes in PVC insulated, nylon insulated and also heat shrink insulated. The PVC insulated type will be the cheapest and most common. PVC is commonly a harder insulation and will crack when crimped and for this reason I would not recommend with them. Nylon insulation is often a softer insulation and will not crack once the terminal is crimped. The nylon insulation may also withstand higher temperatures. I propose using nylon insulated terminals and connectors. Heat shrink insulated terminals and connectors are great for applications the place that the terminal is confronted with outside elements for example high temperatures, rain, snow, and underwater applications.
The warmth shrink insulated terminals with adhesive lining create waterproof connections for the wire. Although heat shrink terminals will not be free these are best connectors to work with since can last the longest and rarely corrode.
When buying electrical connectors it is best to use UL listed terminals and connectors to successfully increasingly becoming quality connections. I suggest steering clear of terminals and connectors which are produced in China due to low quality standards and cheap materials they use to really make the connectors. In case you browse the internet you can find quality terminals and connectors at inexpensive price points.
Contact:
Yeahui Technology Limited
Email: [email protected]
For more information about OBDII Electrical Connectors net page: click for info.