SA-3 cylinder shape burrs are ideal for interior contour work and deburring. Because of the extreme hardness with this tungsten carbide, technology-not only on considerably more demanding jobs than HSS (High-Speed Steel).
Double cut or Cross cut carbide burrs usually are suited for ferrous and non-ferrous metals, soft steel, and also for all non-metal materials like stone, plastics, wood floor, and ceramic. Double cut burrs leaves a somewhat smoother finish than single cut due to producing smaller chips as they cut away the fabric. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is regarded as the popular cut and can view you through most applications.
Machines Utilized on:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Surefire, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are great for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed is decided with the material you use your burr on. If you are experiencing chipping, you’re operating at way too high of speed for your application. Start which has a slower speed while increasing in the process before you achieve the the best results
Apply light pressure and allow the tool do the work. Bearing recorded on the tool will lead to reduced tool life along with a dull burr.
Always wear proper PPE to incorporate (although not tied to) safety glasses, hearing protection, respirator, and safety gloves. Keep all guards set up in your machine.
Avoid use on electricity drills; the slower speeds can result in chipping of the workpiece.
For more info about SA-3 Carbide Burrs go to this site