One of the first things the do-it-yourselfer realizes when studying how to build a drywall ceiling is the fact that no man is definitely an island – unless he uses rented equipment! Since the panels are big, bulky, and awkward, hanging drywall on the ceiling entails one or other: assistance from another person or renting a drywall jack from your local store. The cable mechanism on drywall jacks is just not hard to operate, and jacks do a great job of holding the drywall in the secure, flat position helping you to quicker attach it for the ceiling.
Tools & Materials
Building a Find a Drywall Contractor Walker LA includes knowing what all tools and material you will need. As well as either another person to assist you or perhaps a drywall jack, included in the package need to have a hammer, a drill using a screwdriver bit, and nails or screws for drywall. Included in the package, of course, have to measure your ceiling (twice!) and buy enough drywall, such as a little extra in case there is mistakes, to complete the job.
Mark Joists First
Find the boards – usually 2x4s or 2x6s – that function as ceiling joists by tapping down the wall studs using a hammer and following the wall for the ceiling. As part of learning to develop a drywall ceiling, mark where these boards are placed using a pencil. They are what you should be attaching the drywall to and marking them beforehand can make it much easier to see them than trying to find them while nailing or screwing on the drywall. Then you definately have to measure the place that the permanent fixture goes on the drywall and reduce a dent to match that area of the ceiling.
The hard Part
It’s part in mastering how to build a drywall ceiling where you will need the other person (who hopefully has a lot of stamina along with strength!) to support the drywall to the ceiling or to squeeze drywall panel on the jack. Placed the end from the sheet of drywall – with its finished side facing down – in the center from the ceiling board (joist) which you’re going to nail it. Nail across the not in the panel about a one-half inch through the edges to stop the drywall from splitting or cracking. The person who is holding the panel are now able to move or, if you are using a jack, it is possible to move out of methods.
Ensure it is Pretty
Countersink nails or screws at six- or seven-inch intervals all down the entire joist which the drywall has been attached. Countersinking enables you to conceal the heads from the nails/screws with compound to ensure whenever you paint, the heads won’t be at all visible. Although not really a a part of finding out how to build a drywall ceiling, learning to conceal ugly nail or screw heads serves its purpose for overall general carpentry knowledge.
More information about Find a Drywall Contractor Walker LA have a look at this popular site: click to read more